HOME >> PRODUCTS >> Lithium Battery Production Machine Line >> Pouch Cell Machine
3-in-1 Automatic Pouch Cell Trimming Folding and Ironing Machine (Model 400)
I. Equipment Action Principle
The cutting, folding, and ironing all-in-one machine is a device that integrates three processes: cell trimming, edge folding, and edge ironing.
Operating principle: This equipment comprises five mechanisms: the cell correction and positioning mechanism, trimming mechanism, edge-folding mechanism, edge-ironing mechanism, and robotic automatic pick-and-place device. After manual loading and cell correction/positioning, the operator presses the dual start buttons with both hands to activate the equipment. The cell then undergoes trimming, edge folding, and edge ironing in sequence. Once the ironing process is finished, the ironing mechanism opens, and the cell fixture returns to its original position. The cell is then manually removed.
II. Applicable Cells
Cell length: 20~~375 mm
Cell width: 15~~155 mm
Cell thickness: 5~15 mm
III. Equipment Diagram
IV. Equipment Operating Environment
1. Ambient temperature: 10~40 ℃
2. Relative humidity: 20~90 %
3. The gas supply must be a non-corrosive gas or liquid, and non-explosive gases.
Ⅴ. Equipment Feature
1. Supports both single and double folding operations.
2. Cutting knives rotate synchronously in opposite directions, ensuring high trimming accuracy; knife life exceeds 1.5 million cycles.
3. All four main mechanisms can be adjusted simultaneously for in‑and‑out motion, providing flexible operation.
4. Multiple products can be loaded at once, enhancing production efficiency.
5. Manual and automatic modes are available.
6. Position adjustments for each mechanism are guided by linear slide rails.
7. Folding wheels are made of tool steel, offering excellent wear resistance.
The cutting knife and fixture operating speeds, as well as the edge‑heating temperature, are all adjustable.
Ⅵ. Technical Parameters
|
Category |
Technical Specification |
Parameter/Requirement |
|
Applicable Cell Dimensions |
Length |
20 mm – 375 mm |
|
Width |
15 mm – 155 mm |
|
|
Thickness |
5 mm – 15 mm |
|
|
Environmental Conditions |
Ambient Temperature |
10 ℃ – 40 ℃ |
|
Relative Humidity |
20 % – 90 % |
|
|
Air Supply |
Non-corrosive gas/liquid, no explosive gases |
|
|
Equipment Precision |
Overall Precision |
± 0.05 mm |
|
Trimming Accuracy |
± 0.2 mm |
|
|
Efficiency |
Single Cycle Time |
6 – 8 seconds |
|
Overall Efficiency |
Dependent on manual loading/unloading speed and quantity per load |
|
|
Fixture |
Effective Length |
375 mm |
|
Pass Rate |
Machine Pass Rate |
≥ 98 % (excluding incoming material issues and operator error) |
|
Folding/Heating Requirements |
Double-Fold |
Edges must not extend beyond the cell body; folding and heating are completed in one step |
Ⅶ. Consumables Configuration
One set of cutting knives is provided, and one set of hex wrenches is included.
Contact: Lily You
Phone: +86 18650702009
Tel: +86 18650702009
Email: saleskatbattery@gmail.com
Add: No. 988 Xiahe Road, Siming District, Xiamen City
919121614
adminbuy